正交异性钢桥面板三维疲劳裂纹扩展数值模拟方法

刘益铭, 张清华, 崔闯, 卜一之

中国公路学报 ›› 2016, Vol. 29 ›› Issue (7) : 89-95.

PDF全文下载(2458 KB)
PDF全文下载(2458 KB)
中国公路学报 ›› 2016, Vol. 29 ›› Issue (7) : 89-95.
桥梁与隧道工程

正交异性钢桥面板三维疲劳裂纹扩展数值模拟方法

  • 刘益铭, 张清华, 崔闯, 卜一之
作者信息 +

Numerical Simulation Method for 3D Fatigue Crack Propagation of Orthotropic Steel Bridge Deck

  • LIU Yi-ming, ZHANG Qing-hua, CUI Chuang, BU Yi-zhi
Author information +
文章历史 +

摘要

针对正交异性钢桥面板中典型的疲劳开裂,基于线弹性断裂理论,建立了正交异性钢桥面板关键疲劳易损部位的三维裂纹扩展数值模拟方法。以典型正交异性钢桥面板作为研究对象,对常幅荷载作用下U肋与横肋连接焊缝部位的三维疲劳裂纹扩展进行了数值模拟,通过模型试验验证了所提方法的有效性和可行性,在此基础上,对于该部位三维疲劳裂纹的扩展特性及疲劳寿命预测进行了研究。研究结果表明:所建立的数值模拟方法能够较为准确地预测研究对象的裂纹扩展路径,并为其疲劳寿命评估提供科学依据;Ⅰ型断裂在复合型裂纹扩展中起主导作用;表面裂纹与沿板厚扩展的中裂纹随疲劳裂纹的扩展表现出不同的扩展特性。

Abstract

According to the typical fatigue cracking of orthotropic steel bridge deck, based on the theory of linear elastic fracture mechanics, a 3D crack propagation numerical simulation method for the predominant details vulnerable to fatigue in orthotropic steel bridge deck was established. Taking the typical orthotropic steel bridge deck as the research object, the numerical simulation was carried out on the 3D fatigue crack propagation of U-rib to transverse joints under constant amplitude loads. The validity and feasibility of the method were proved by model test. Based on this, the 3D crack propagation behavior and fatigue life prediction of these vulnerable details were investigated. The results show that by the established method, a relatively accurate crack propagation path of the research object can be predicted, providing a scientific basis for the fatigue life estimation; fracture model Ⅰ has a dominant effect on mixed mode crack propagation; the cracks in the surface and along the thickness direction present different propagation behaviors with the propagation of fatigue cracks.

关键词

桥梁工程 / 正交异性钢桥面板 / 断裂力学 / 三维疲劳裂纹扩展特性 / 数值模拟 / 疲劳寿命预测

Key words

bridge engineering / orthotropic steel bridge deck / fracture mechanics / behaviour of 3D fatigue crack propagation / numerical simulation / prediction of fatigue life

引用本文

导出引用
刘益铭, 张清华, 崔闯, 卜一之. 正交异性钢桥面板三维疲劳裂纹扩展数值模拟方法[J]. 中国公路学报, 2016, 29(7): 89-95
LIU Yi-ming, ZHANG Qing-hua, CUI Chuang, BU Yi-zhi. Numerical Simulation Method for 3D Fatigue Crack Propagation of Orthotropic Steel Bridge Deck[J]. China Journal of Highway and Transport, 2016, 29(7): 89-95
中图分类号: U441.4   

参考文献

[1] WOLCHUK R.Lessons from Weld Cracks in Orthotropic Decks on Three European Bridges[J].Journal of Structural Engineering,1992,116(1):75-84.
[2] 王春生,付炳宁,张芹,等.正交异性钢桥面板足尺疲劳试验[J].中国公路学报,2013,26(2):69-76. WANG Chun-sheng,FU Bing-ning,ZHANG Qin,et al.Fatigue Test on Full-scale Orthotropic Steel Bridge Deck[J].China Journal of Highway and Transport,2013,26(2):69-76.
[3] 张清华,崔闯,卜一之,等.港珠澳大桥正交异性钢桥面板疲劳特性研究[J].土木工程学报,2014,47(9):110-119. ZHANG Qing-hua,CUI Chuang,BU Yi-zhi,et al.Study on Fatigue Features of Orthotropic Decks in Steel Box Girder of Hong Kong-Zhuhai-Macao Bridge[J].China Civil Engineering Journal,2014,47(9):110-119.
[4] 曾志斌.正交异性钢桥面板典型疲劳裂纹分类及其原因分析[J].钢结构,2011,26(2):9-15. ZENG Zhi-bin.Classification and Reasons of Typical Fatigue Cracks in Orthotropic Steel Deck[J].Steel Construction,2011,26(2):9-15.
[5] 王斌华,吕彭民,邵雨虹.正交异性钢桥面板隔板与U肋连接热点应力分析[J].长安大学学报:自然科学版,2013,33(5):57-63. WANG Bin-hua,LU Peng-min,SHAO Yu-hong.Analysis of Structure of Diaphragm-to-rib Welded Connection in Orthotropic Steel Deck by Means of Hot Spot Stress Approach[J].Journal of Chang'an University:Natural Science Edition,2013,33(5):57-63.
[6] 崔闯,卜一之,张清华.正交异性钢桥面板焊缝疲劳性能评估方法[J].中国公路学报,2015,28(7):52-57. CUI Chuang,BU Yi-zhi,ZHANG Qing-hua.Fatigue Property Assessment Methods for Weld Joint in Orthotropic Steel Bridge Deck[J].China Journal of Highway and Transport,2015,28(7):52-57.
[7] 朱劲松,郭耀华.正交异性钢桥面板疲劳裂纹扩展机理及数值模拟研究[J].振动与冲击,2014,33(14):40-47. ZHU Jin-song,GUO Yao-hua.Numerical Simulation on Fatigue Crack Growth of Orthotropic Steel Highway Bridge Deck[J].Journal of Vibration and Shock,2014,33(14):40-47.
[8] CHOI J H,KIM D H.Stress Characteristics and Fatigue Crack Behavior of the Longitudinal Rib-to-cross Beam Joints in an Orthotropic Steel Deck[J].Advances in Structural Engineering,2008,11(2):189-198.
[9] 顾萍,周聪.铁路正交异性钢桥面板典型疲劳裂纹寿命估算[J].铁道学报,2012,34(1):97-102. GU Ping,ZHOU Cong.Estimation of Fatigue Life of Typical Fatigue Cracks of Orthotropic Steel Decks of Railway Bridges[J].Journal of the China Railway Society,2012,34(1):97-102.
[10] 张行,崔德渝,孟庆春,等.断裂与损伤力学[M].北京:北京航空航天大学出版社,2006. ZHANG Hang,CUI De-yu,MENG Qing-chun,et al.Fracture and Damage Mechanics[M].Beijing:Beihang University Press,2006.
[11] BS 7608:1993,Guide on Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures[S].
[12] ⅡW Document XⅢ-21514r4-07,XV-1254r4-07,Recommendations for Fatigue Design of Welded Joints and Components[S].
[13] BS 7910:1999,Guide on Methods for Assessing the Acceptability of Flaws in Fusion Welded Structures[S].
[14] RADAJ D,SONSINO C M,FRICKE W.Fatigue Assessment of Welded Joints by Local Approaches[M].Cambridge:Woodhead Publishing,2006.
[15] PARIS P C,EDORGAN F.A Critical Analysis of Crack Propagation Laws[J]. Journal of Basic Engineering,1963,85(4):528-534.
[16] 童乐为,顾敏,朱俊,等.基于断裂力学的圆钢管混凝土T型焊接节点疲劳寿命预测[J].工程力学,2013,30(4):331-336. TONG Le-wei,GU Min,ZHU Jun,et al.Prediction of Fatigue Life for Welded T-joints of Concrete-filled Circular Hollow Sections Based on Fracture Mechanics[J].Engineering Mechanics,2013,30(4):331-336.
[17] 张清华,崔闯,卜一之,等.正交异性钢桥面板足尺节段疲劳模型试验研究[J].土木工程学报,2015,48(4):72-83. ZHANG Qing-hua,CUI Chuang,BU Yi-zhi,et al.Experimental Study on Fatigue Features of Orthotropic Bridge Deck Through Full-scale Segment Models[J].China Civil Engineering Journal,2015,48(4):72-83.
[18] 马野,许希武,宁晋建.整体加筋壁板裂纹扩展轨迹模拟及控制分析[J].固体力学学报,2009,30(3):251-258. MA Ye,XU Xi-wu,NING Jin-jian.An Analysis of Crack Growth Simulation and Crack Arrest in Integrally Stiffened Panel[J].Chinese Journal of Solid Mechanics,2009,30(3):251-258.

基金

“十二五”国家科技支撑计划项目(2011BAG07B03);国家自然科学基金项目(51578455);中央高校基本科研业务费专项资金项目(2682014CX078)
PDF全文下载(2458 KB)

2123

Accesses

0

Citation

Detail

段落导航
相关文章

/